dcsimg
TDI based systems Product List

Product List

There is no product in this productgroup.
There is no product in this productgroup available in your country.
There are no matches for this filter criteria. Please enter another criteria or press reset to see all results again.
There is no product for this keyproperty available in your country.
There is no product for this propertysearch. Please try with another criteria.
There is no product for this application.
There is no product for this technology.
Datasheet
Property Curves
Safety Data Sheets
Related Downloads
Login required
Products:
A total of 24 search results 1 2 3 1 2 3 
show 5 10 25 50 all of 24
Product name
Information
Downloads

Based on TDI-polyester with free monomers content below 0.1%, Desmodur® LU-D prepolymers cured with Baytec® XL 1705 give elastomers from 70 Shore A to 50 Shore D with good properties under safer handling conditions.

Based on TDI-polyester with free monomers content below 0.1%, Desmodur® LU-D prepolymers cured with MOCA give elastomers from 70 to 95 Shore A with high mechanical and dynamical performances.

Based on TDI-PTMEG with free monomers content below 0.1%, Desmodur® LU-T prepolymers cured with Baytec® XL 1705 give elastomers from 90 Shore A to 57 Shore D with good properties under safer handling conditions.

Based on TDI-PTMEG with free monomers content below 0.1%, Desmodur® LU-T prepolymers cured with Baytec® XL 2190 give elastomers from 78 Shore A to 75 Shore D with superior performances in dynamic and temperature resistance.

Based on TDI-PTMEG with free monomers content below 0.1%, Desmodur® LU-T prepolymers cured with MOCA give elastomers from 80 Shore A to 75 Shore D with enhanced properties and improved processing parameters.

This TDI-polyester system allows obtaining elastomers from 20 to 58 Shore A with low compression set and very good resistance to solvents. It is specially designed for printing applications.

This TDI-polyester system allows obtaining elastomers from 35 to 58 Shore A with a low compression set and very good resistance to solvents. It is specially designed for printing applications.

This TDI-polyester system allows obtaining elastomers from 35 to 58 Shore A with a low compression set, an excellent resistance to solvents and a good machinability. It is specially designed for printing applications.

This TDI-polyester system allows obtaining elastomers from 35 to 58 Shore A with a low compression set, an excellent resistance to solvents and a good machinability. It is specially designed for printing applications.

These TDI-polyester based prepolymers cured with MOCA give elastomers from 80 to 95 Shore A with good mechanical properties. Compared to MOCA, Baytec® XL 1705 is liquid at room temperature and easier to process

LOCATIONS & CONTACTS
Login
Register for more information
Forgot your password?